The quality of the water-horse fence meets the actual needs of municipal engineering, it is convenient to use and has a long service life. , Hotels, communities, sports venues, risk areas and road construction sites, temporary barriers and other places for gathering addresses are used as road separations, regional barriers, diversions, orientations, or used in some celebration occasions for book delivery, or sports entertainment and other competitive performances In order to maintain the order of the occasion, what are the precautions for the use of water and horse enclosures, the following explains:
1. Avoid dragging when installing the plastic enclosure, so as not to reduce the service life. The water injection hole should face inward to prevent theft.
2. When injecting water, the pressure of the water pipe should be increased to shorten the installation speed, and the water can be injected to the surface of the water injection hole. According to the length of the construction period and the environmental conditions of the construction site, one or several pieces of water can also be injected. This water injection method will not affect the stability of the plastic enclosure.
3. There is a flag hole on the top of the product, which can be used to insert colorful flags or install warning lights and warning devices. It is also possible to drill holes on the plastic enclosure block to install lighting fixtures or use self-tapping screws to fix and connect various objects. This small area of installation will not affect the quality and performance of the product.
4. For the fence that is torn, damaged or leaked during use, the repair method is simple. After heating with a 300-watt and 500-watt electric soldering iron, it can be repaired at will.
5. If the plastic fence is stuck with dirt and dust during use, the dirt and dust can be washed away when it rains. For thicker soil, just rinse with water. Oil stains such as sticking paint and asphalt can be wiped and cleaned with various cleaning agents, which will not damage or destroy the surface finish of the product. But do not use sharp tools and knives to scratch, it is easy to damage and destroy the finish of the plastic enclosure surface.
6. The high-density polyethylene material has good reducibility. For the deformed and bent product of the whole board, as long as it is placed vertically and connected, it will soon be restored and flat. Therefore, the products in stock can be placed in a plane cross-stacking, so as to reduce the space for placing the products in stock.
英语
中文简体
